+91-9930388308
9:00AM to 7:00PM
A286 Round Bars, which offers high flexibility in indented zones. Our Alloy A286 round Bars is a victor among the most unavoidable high temperature amalgams, which is open in a wide level of ingot, billet, bar, and circle post sizes.
These Alloy A286 Flat Bars has high bore and disintegration restriction for temperatures up to 1300 Degree F (704 Degree C) and oxidation square up to 1800 Degree F (982 Degree C). Oxidation hindrance of our Alloy A286 Threaded Bars is high for unending help of 1500 Degree F, sporadic to 1800 Degree F.
The mechanical properties of these Alloy A286 Hollow Bars are made by fitting approach toughening and precipitation setting cures. Our Alloy A286 Hexagonal Bars is iron – nickel – chromium based austenitic iron based material that furthermore combines molybdenum and titanium. Iron – base austenitic set steel that has scored break quality superior to some other composite by strategies in each handy sense undefined high – temperature properties, these Alloy A286.
Triangular Bars is age – hardenable for high mechanical properties. Truth be told, the indented break nature of our Alloy A286 Bars is superior to anything distinctive differing business mixes with in each handy sense ambiguous high temperature properties. These Alloy A286 Rods is used in conveyor and current gas turbine, super – charger zones, stream engines, sharp edges, wheels, castings, plots, secure, affiliations, rib nuts, screws, max motor motivation parts.
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, Alloy |
Size |
: | 5 mm To 500 mm |
Diameter | : | 0.1 mm to 100 mm |
Length | : | 100 mm To 3000 mm Long & Above |
Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Grade | Cr | Ni | Mo | Co | Va | Al | Ti | B | C | Fe | Mn | Si | P | S |
Alloy A286 | 13.5-16.0 | 24.0-27.0 | 1.0-1.5 | 1.0 max | 0.1-0.5 | 0.35 max | 1.9-2.35 | 0.003-0.01 | 0.08 max | Bal | 2.0 | 1.0 | 0.025 | 0.025 |
Temperature, °F | 70* | 70 | 400 | 800 | 1000 | 1200 | 1400 |
Ultimate Tensile Strength, ksi | 95* | 145 | 143 | 138 | 131 | 103 | 64 |
0.2% Yield Strength, ksi | 50* | 95 | 93 | 93 | 87 | 88 | 62 |
Elongation, % | 40* | 24 | 21 | 18 | 18 | 13 | 18 |
Temperature, °F | 200 | 800 | 1000 | 1200 | 1400 |
Coefficient of Thermal Expansion, in/in°F x 10-6 | 9.2 | 9.6 | 9.8 | 9.9 | 10.3 |
Thermal Conductivity Btu • ft/ft2 • hr • °F |
8.0 | 9.8 | 13.0 | 14.1 | – |
Modulus of Elasticity, psi X 106 |
– | – | 24 | 22 | 23 |