info@psecm.com

+91-9930388308

9:00AM to 7:00PM

Inconel 800/800H/800HT Coils

Inconel 800/800H/800HT Coils Manufacturers, Inconel 800/800H/800HT Coils Exporters, Inconel 800/800H/800HT Coils Suppliers, Inconel 800/800H/800HT Coils Importers , Inconel 800/800H/800HT Coils Stockists

Inconel 800/800H/800HT Coils Manufacturers in Mumbai, Inconel 800/800H/800HT Coils Exporters in Mumbai , Inconel 800/800H/800HT Coils Suppliers in Mumbai, Inconel 800/800H/800HT Coils Importers in Mumbai , Inconel 800/800H/800HT Coils Stockists in Mumbai

Inconel 800/800H/800HT Coils Manufacturers in India, Inconel 800/800H/800HT Coils Exporters in India, Inconel 800/800H/800HT Coils Suppliers in India, Inconel 800/800H/800HT Coils Importers in India , Inconel 800/800H/800HT Coils Stockists in India

Inconel 800 Slatting Coil, Inconel 800 Circle, Incoloy Alloy 800H Coils, 800HT Incoloy Hot Rolled Coils Supplier in Mumbai, India. Incoloy 800 Circle, Incoloy Werkstoff Nr. 1.4876 Coils Dealer in India. 800HT Incoloy Polished Cold Drawn Plates, 800 Incoloy Plate Stockholder, Distributors Of ASME SB409 Incoloy 800H Coils, Incoloy GOST ЭИ670 Strips Stockist, Manufacturer.

Incoloy 800 Coils are security from stretched out preface to high temperatures. Incoloy 800H Sheets is especially practical as it keeps up a dependable improvement, despite when unprotected to taking off temp.

In the interim, these Incoloy 800H Plates are correspondingly being offered in different sizes and shapes to our customers. Incoloy 800HT Coils perform well in sodium salt and other fluid salt conditions, with stress utilize part square beating standard austenitic set steels.

Incoloy 800 Slatting Coils has splendid impenetrable to oxidation and carburization in high temperature conditions. Incoloy 800HT Perforated Coils has an obliged science, inside the cutoff inspirations driving Incoloy 800H Perforated Coils, and requires a glimmer treatment of 2100 Degree F (1149 Degree C) least.

Inconel 800HT Coils is in like manner used for valves, fittings and various parts familiar with hazardous device from 1100 Degree F to 1800 Degree F. Blend 800 Sheets Plates with a standard temper is recommended for relationship underneath 1100 Degree F (600 Degree C)

Inconel 800/800H/800HT Coils Specifications

Specifications : ASTM / ASME SB 409
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Equivalent Grades for 800/800H/800HT Inconel Coils

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Inconel 800/800H/800HT Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Inconel 800/800H/800HT Coil Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Inconel 800/800H/800HT Coils Applications

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceutical
  • EquipmentSea Water
  • EquipmentPulp and Paper Industry

Domestic Area

Our Export