Nimonic 90 Sheets & Plates Manufacturers, Nimonic 90 Sheets & Plates Exporters, Nimonic 90 Sheets & Plates Suppliers, Nimonic 90 Sheets & Plates Importers, Nimonic 90 Sheets & Plates Stockists.
Nimonic 90 Sheets & Plates Manufacturers in Mumbai, Nimonic 90 Sheets & Plates Exporters in Mumbai, Nimonic 90 Sheets & Plates Suppliers in Mumbai, Nimonic 90 Sheets & Plates Importers in Mumbai, Nimonic 90 Sheets & Plates Stockists in Mumbai.
Nimonic 90 Sheets & Plates Manufacturers in India, Nimonic 90 Sheets & Plates Exporters in India, Nimonic 90 Sheets & Plates Suppliers in India, Nimonic 90 Sheets & Plates Importers in India, Nimonic 90 Sheets & Plates Stockists in India.
Nimonic Alloy 90 UNS N07090 Strips, Sheet & Plate Manufacturer, Nimonic Alloy 90 Strips, Sheet & Plate Manufacturer In Mumbai, India & Nimonic Alloy 90 Strips, Sheet & Plate Exporter In Mumbai, India.
Nimonic 90 Plate is a precipitation-hardenable nickel-chromium-cobalt composite having high weight influenced quality and creep check at temperatures to about 1700°F (920°C). In setting on mind blowing validation from high-temperature isolating and oxidation. Composite 90 Plate changed into the prime choice of Oil and Gas Extraction and Processing, Nuclear, Aerospace, Power Generation and Automotive, gas turbines, hot-working contraptions, and springs applications and It is completely used and an especially showed up in high temperature conditions.
The Density of Nimonic 90 Sheet is 0.296 lb/in3, (8.18 g/cm3). Nimonic 90 Coil can be made some spot in the segment of 2100 and 1850ºF (1150 and 1010ºC) after which process it may be air cooled or water approved, subordinate upon the size and multifaceted nature of the made piece of Nimonic 90 Clad Plate.
Nimonic Alloy 90 sheet and Nimonic Alloy 90 plate in various qualities, sizes and grades which are moving out of Nimonic 90 Sheet and Nimonic 90 Plate (2mm to 12mm). Nimonic 90 Sheet is open in thicknesses running from .016 to .156".
Huge size Nimonic 90 plate will in like way decay the segment of the bewildering warmth influenced zone seen by welding. We other than stock and supply extra gigantic size Nimonic 90 Sheets, terrible and ultra-little measure Nimonic Alloy 90 strip and foil things, moved down to 2 microns.
Nimonic 90 Sheet, Plate Specifications
| Specifications | ASTM B463 / ASME SB463 |
| Standard | ASTM, ASME and API |
| Specialize | Nimonic® 90 Shim Sheet, Designer Sheet, B. Q. Profile. |
| Size | 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH |
| Form | Nimonic 90 Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Designer Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Nimonic 90 Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Nimonic 90 Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Grade | Nimonic 90 (UNS N07090 ) |
Nimonic 90 Sheet Plate Chemical Compositions
| Grade | Ni | Cr | Co | Ti | Al | C | Si | Cu | Fe | Mn | B | S | Zr | Pb |
| Nimonic 90 | Bal | 18-21 | 15-21 | 2-3 | 1-2 | 0.2 max | 1.0 max | 0.2 max | 1.5 max | 1.0 max | 0.02 max | 0.015 max | 0.15 max | 0.0020 max |
Nimonic 90 Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Nimonic 90 | 2.4632 | N07090 |
Nimonic 90 Sheet Plate Physical Properties
| Grade | Density | Specific Gravity | Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) | Electrical Resistivity (microhm-cm (at 68 Deg F) | Melting Point (Deg F) |
| Alloy 90 | 8.18g/cm³ | 1370°C | 12.7 μm/m °C (20 – 100°C) | 82.5 kN/mm² | 213 kN/mm² 227 / 240 kN/mm² |
| 0.296 lb/in³ | 2500°F | 7.1 x 10-6 in/in °F (70 – 212°F) | 11966 ksi | 30894 ksi 32924 / 34810 ksi |
Nimonic 90 Sheet Plate Mechanical Properties
| Grade |
Material Sheet |
Temperature °C | Yield Strength 0.2 % (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness HV |
| Nimonic 90 | Nimonic 90 sheet Solution Treated (BS HR202) |
RT | – | – | – | 250 max |
| Nimonic 90 sheet Precipitation Treated (BS HR 202) |
RT | 695 min | 1080 min | 25 min (0.45mm-3.0mm) |
280 min | |
| Nimonic 90 sheet Precipitation Treated (BS HR202) |
500 | 740 (typical) | 995 (typical) | 30 | – | |
| Alloy 90 Cold Rolled Sheet (Heat Treated) |
– | – | – | – | – |
Nimonic 90 Sheet Plate Applications
- Fertilizers Industry
- Aerospace Industry
- Nuclear Power Plant Industry
- Chemical Industry
- Oil & Gas Industry
- Refineries Industry
- Petrochemical Industry
- Paper Industry
