+91-9930388308
9:00AM to 7:00PM
Stainless Steel 304H Coils pass on an inconceivable mix of the nickel 8% and chromium 18%, with that 0.08% carbon. It is a right mix that built up the properties of the tempered steel. Its standard use you will find in the cooking vessels. As it is a heavenly individual among the most flexible amalgams, its uses are despite getting hair-raising, it is quite similar to way being used in the business and mechanical region and with that also show the high use obstruction property.
With that, it is even fundamental for age. This examination of the bend furthermore has the beast quality and formability that shield the circles for long from the trademark ambushes. The high temperature in it other than improved a ton in light of the utilization of lower carbon content. Everything thought of it as, contains 0.04 to 0.10% of carbon in its relationship at any rate that. It even passes on long and transient grouch quality which works under the temperature over the 500 degree Celsius. It even acts dynamically essential refinement which is altogether more inquisitively with another blend which is there in the market and being utilized.
This material is commonly used in the constructional applications and with that in various applications like in all the all the more sizzling, condensers, oil purifiers, steam handicaps, and so on. In like manner, it passes on the higher quality in the raised temperature that makes it best to be used in countless the application where the temperature remains high always. Tempered Steel 304H Coils are besides used in unending the electric age plants in light of its make and tremendous quality.
Specifications | : | ASTM A240 / ASME SA240 |
Thickness | : | 4mm-100mm |
Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Designer Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
STANDARD | WERKSTOFF NR. | UNS |
SS 304H | 1.4948 | S30409 |
Element | SS 304H |
C | 0.10 max |
Mn | 2.0 max |
Si | 0.75 max |
P | 0.045 max |
S | 0.03 max |
Cr | 18 – 20 |
Ni | 8 – 10.5 |
Element | SS 304H |
Density | 8.0 g/cm3 |
Melting Point | 1400 °C (2550 °F) |
Tensile Strength | Psi – 75000 , MPa – 515 |
Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
Elongation | 40 % |