+91-9930388308
9:00AM to 7:00PM
All around mentioned the fervor of the mechanical things is connecting as you beyond question understand each new thing improve the working of the forefront things. Much indistinguishable to the sheets and plates which look direct the material which is used in it makes the thing strong and best to use. Treated Steel 304 Sheets and Plates, it is said to be a manager among the most all around used tempered steel that offers sponsorship to the thing for long and it even keeps up the structure of the plates and sheets for long. If you look at the thing outline, by then you will find that its thickness contrasts from 0.3 to 120mm. These steels and plates are extensively used in the enormous affiliations.
In this thing, you will find the use of the carbon substance, manganese, and nickel that helps in shaping out the thing. Contacting this, it even lifts up various properties of the thing, for instance, disintegration block, yield quality, and so forth. You can even say that is mechanical properties are too high that helps in covering the application well. This assessment of treated steel can deal with any kind of condition.
These are very few basic features of the Stainless Steel 304 Sheets and Plates which make the thing best from every single focus intrigue. Padmavati Steel & Engg.Co., a connection who produce these plates and sheets and tolls all around the world. There you will moreover get the thing with veritable subtleties reliably.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness :0.01 mm to 250 mmThk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18-09 | X5CrNi18-10 |
Element | SS 304 |
C | 0.08 max |
Mn | 2 max |
Si | 0.75 max |
P | 0.045 max |
S | 0.030 max |
Cr | 18 – 20 |
Ni | 8 – 11 |
Element | SS 304 |
Density | 8.0 g/cm3 |
Melting Point | 1400 °C (2550 °F) |
Tensile Strength | Psi – 75000 , MPa – 515 |
Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
Elongation | 35 % |